Condition Menu; Interlace Setup Menu - Oce CS9090 User Manual

Chapter 5: Handling the printer
5.4.2.3

Condition menu

Select the required printing quality.
Setup items
Condition (1/4)
Condition (2/4)
Condition (3/4)
Condition (4/4)
Condition (1/4 – 4/4)
5.4.2.4

InterLace Setup menu

To set the over printing method (interlace method) for printing.
Setup items Parameters
Interlace method 1 pass
1 pass Few
2 pass
4 pass
-
AP-75036 - Revision 1.3 – 20/03/06
Parameters Description
<360 × 360dpi> The display changes to interlace setup items after the print
quality items settings have been finished.
720 × 360dpi
360 × 720dpi
Diagonal 720dpi
720 × 720dpi
1080 × 1080dpi
1440 × 720dpi
720 × 1440dpi
Diagonal 1440dpi
1440 × 1440dpi
2160 × 1080dpi
1080 × 2160dpi
Diagonal 2160dpi
2880 × 1440dpi
1440 × 2880dpi
Diagonal 2880dpi
- [CANCEL] key: To shift to the previous hierarchy menu.
Description
Over printing is not performed.
Only gaps between lines are overwritten.
Over-printing is performed twice per 1 line.
Over-printing is performed four times per 1 line.
[CANCEL] key: To shift to the previous hierarchy menu.
96 User's Guide CS9000 series