Pitney Bowes DM300c Service Manual page 194

5 • Removal & Replacement
WOW Section of Feeder/WOW Module (use for DM475)
5.56 Feeder/
WOW
Registration
Wall Alignment
5-68
6. Check to make sure the WOW unit can be moved forward and back-
ward. Move WOW unit all the way back towards the back of the ma-
chine (see bottom right photo).
Moving WOW Unit Backward/Forward
7. Remove cover screw mounting "L" bracket on right side of bottom chassis.
8. Place "L" bracket between registration wall and WOW deck on side of
machine.
WOW Deck
9. Slide WOW unit forward until "L" bracket is tight.
Cover Screw
Mounting "L"
Bracket
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
Screw Indicating WOW
Unit In Fully Back Position
Registration Wall
"L" Bracket