Printer/Base (use for all models)
5.24 Waste Pad
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
1. Remove lower transport assem-
bly from machine (section 5.22).
2. Pull off transport lock lever.
3. Remove two screws that secure
cover to transport assembly. See
4. Separate cover from lower trans-
5. Reassemble in reverse order.
1. Squeeze tray handles and slide out waste pad tray.
2. Carefully lift out waste pad using a paper towel.
3. Replace waste pad and insert tray in side of machine.
Figure 5-78 Waste Pad Drawer
Figure 5-79 Removing Waste Pad
5 • Removal & Replacement
Figure 5-77 Lower Transport Cover