DM300c / DM400c / DM450c / DM475 Ink Tray Replacement Instructions
1. Replace Ink Tray
A.
Remove ink tray from envelope and set both tray
and envelope aside.
B.
Pull ink drawer out from side of meter. Remove ink tray.
WARNING: Ink may stain skin or permanently
damage clothing. Gloves are included
in the kit for your convenience.
C.
Dispose of used ink tray
in envelope that new
ink tray came in.
D.
Insert new ink tray
into ink drawer and
close drawer.
2. Enable Meter Printing
Note: Do not unplug power cord until instructed.
If you see an ink tray message on your home screen,
follow these steps to remove it and enable postage printing.
From the home screen, select Menu, then Maintenance.
A.
Select Replace Waste Tank.
B.
C.
Important: Please do not use your
C
meter without the waste Ink tray installed.
Select OK, I understand to proceed.
D
D.
Select Yes, tray is replaced.
C
The ink tray message on your home screen will
D
now disappear and postage printing will be enabled.
If you have any questions, call Pitney Bowes at
1-800-522-0020 or go to www.pbdirectreturn.com
Maintenance
Printer Maintenance
View System Info
Replace Waste Tank
Important Note!
Please do not use your
meter without the waste
ink tray installed.
OK,I understand
Have you replaced
the waste ink tray?
Yes, tray is replaced
No, Not Yet
How to order replacement?
AW22455 Rev C 12/2015