Download Print this page

Advertisement

5 • Removal & Replacement
WOW Section of Feeder/WOW Module (use for DM475)
5.55 WOW
Load Cell
Assembly
5-64
1. Remove WOW unit chassis (section 5.51).
2. Remove feeder/WOW control board on its bracket (section 5.41)
3. Remove WOW upper transport assembly (section 5.47)
4. Remove lower transport WOW assembly (section 5.53).
5. Release tensioner and remove belt on motor drive pulley.
6. Remove the motor drive pulley (consists of pulley, e-clip brass washer
and plastic washer).
Belt for Motor
Drive Pulley
7. Remove seven screws holding wall plate to load cell unit.
Wall Plate
Motor Drive
Pulley
Plastic Washer
Brass Washer
Load Cell
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
Screws
(white circles)
Position Pins
(black circles)

Advertisement

Chapters

This manual also for:

Dm400c, Dm475, Dm450c

Comments to this Manuals

Symbols: 0
Latest comments: