Printer/Base (use for all models)
5.13 Printhead
Carriage
Assembly
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
Figure 5-42 Removing Inner Rail Mount-
ing Screw
14. Remove the mounting screw from
the outer rail as shown in Figure
5-44, right.
15. Lift the shaft up slightly and pull it
toward the front of the machine to
remove the carriage assembly.
16. Reassemble in reverse order.
Figure 5-45 Removing Carriage Assem-
bly
Power Supply Shield
Logic Board
Drive Shaft
Purge Unit
Figure 5-46 Chassis with Carriage As-
sembly Removed
5 • Removal & Replacement
Figure 5-43 Pushing Rail Forward
Figure 5-44 Removing Inner Rail
Mounting Screw
Drive Motor
Figure 5-47 Carriage Assembly
Inner Rail Bushing
Snaps in Position
5-15