Download Print this page

Pitney Bowes DM300c Service Manual: Envelope Tape Transport; Dm400c /dm450c/dm475 Autofeeder Transport

Hide thumbs

Advertisement

3 • Theory Of Operation
3.3 User
Interface
3.4 Envelope/
Tape Transport
TIP: The DM475 uses
the existing DM400c
autofeeder hardware,
print engine, modem,
USB and serial ports,
meter PSD, and tape
feeder.
TIP: See section 3.10
for DM475 differences
and specific feeder/
WOW theory.
3-4
Modes of Operation (cont'd)
Setup. Users view and customize system settings, as explained in the
DM300c/DM400c/DM475 Operating Guide. These system settings include:
1. Date / Ad / Inscriptions Menu
2. Options Menu
3. Reports Menu
4. Presets (Normal and Custom) Menu
5. Accounting Menu
6. Meter Graphics Menu
7. Setup Menu
8. Advanced Functions Menu
9. Funds Menu
10. Account Menu
The envelope/tape transport consists of five subsystems:
an autofeeder (DM400c/DM475) that separates and feeds a stack of
envelopes onto the feed deck of the mailing machine
a tape transport unit that separates and feeds tape strips onto the feed
deck
in the printer/base, an upper transport driven by the transport drive motor
in the printer/base, a lower, hinged transport which has a series of idler
rollers friction driven by the upper transport
a motion control system that monitors the position of the envelope or
tape strip as it traverses the transport.

DM400c /DM450c/DM475 Autofeeder Transport

As noted above, the automatic feeder is designed to separate and feed a
stack of envelopes into the printer which serves as an indicia printer. The
DM400c/DM450c feeder is fully integrated with the printer; it is not available
as a separate module and therefore cannot be field retrofitted.
The feeder has the following transport components:
Drive Motor
Drive System
Feed Deck
Separator
Envelope Moistener
Feeder Exit Roller and Sensor FS2
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)

Advertisement

Chapters

This manual also for:

Dm400c, Dm475, Dm450c

Comments to this Manuals

Symbols: 0
Latest comments: