Download Print this page

Advertisement

5 • Removal & Replacement
Auto-Feeder (use for DM400c/DM450c/DM475)
5.32 Feed Belt
Assembly
5-36
1. Remove feeder unit (section
5.28).
2. Release the release lever.
3. Remove spring and loosen
the belt tensioner screw as
shown in the figure, right.
4. Remove timing belt and
gear.
5. Remove two E-Clips, and
pulleys as shown at the
right.
6. Remove three bushings as
shown in Figure 5-110.
Figure 5-108 Release Lever
E-Clips and Pulleys
Loosen Screw
Spring
Figure 5-109 Timing Belt/Gear Removal
Figure 5-110 Bushing Removal
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
Release Lever
Gear
Timing Belt

Advertisement

This manual also for:

Dm400c, Dm475, Dm450c

Comments to this Manuals

Symbols: 0
Latest comments: