Download Print this page

Advertisement

Auto-Feeder (use for DM400c/DM450c/DM475)
5.37 Sealer
Finger
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
1. Remove feed roller assembly
(section 5.32).
2. Release sealer finger pres-
sure spring.
3. Free lever.
4. Squeeze tabs on back wall.
See figure, right, for location.
5. Remove sealer pressure fin-
ger.
6. Reassemble in reverse order.
5 • Removal & Replacement
Figure 5-122 Sealer Finger
Pressure
Spring
Figure 5-123 Sealer Finger Assembly in
Position
Tab
Pressure
Tab
Spring
5-41

Advertisement

Chapters

This manual also for:

Dm400c, Dm475, Dm450c

Comments to this Manuals

Symbols: 0
Latest comments: