Segmented Roller - Pitney Bowes DM300c Service Manual

Printer/Base (use for all models)
5.21
Segmented
Roller
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
1. Remove all printer/base covers (sections 5.2 through 5.5 and 5.7).
2. Remove main logic and power supply PCBs (sections 5.17 and 5.19).
3. Remove encoder sensor, encoder disc and cover (section 5-20).
4. Remove input feed deck (three screws). See Figure 5-70.
5. Carefully remove the black plastic apron (four screws). See Figure 5-70.
6. Free segmented roller from frame and belt as shown in Figure 5-71.
7. Reassemble in reverse order.
Input Feed Deck
Figure 5-70 Removing Input Feed Deck
and Front Apron
Figure 5-72 Segmented Roller Assembly
5 • Removal & Replacement
Front Apron
Figure 5-71 Removing Segmented
Roller Assembly
5-23