Forced Trunk Disconnect - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Forced Trunk Disconnect allows an extension user to disconnect (release) another extension active

outside call. The user can then place a call on the released trunk. Forced Trunk Disconnect lets a user

access a busy trunk in an emergency, when no other trunk is available. Maintenance technicians can

also use Forced Trunk Disconnect to release a trunk on which there is no conversation. This can happen

if a trunk does not properly disconnect when the outside party hangs up.

Forced Trunk Disconnect abruptly terminates the active call on the line. Only use

this feature in an emergency and when no other lines are available.

This feature only works on an analog trunk. ISDN and IP trunks do not have the Forced Trunk

Disconnect available.

Default Setting

COS 15 = Enabled

COS 1~14 = Disabled

System Availability

All Terminals

Required Component(s)

Analog Trunks

Forced Trunk Disconnect