NEC Univerge SV8100 Features And Specifications Manual page 656

Issue 7.0
Program
Program Name
Number
11-15-03 Service Code Setup,
Administrative (for Special
Access) – Backup Data Save
11-15-05 Service Code Setup,
Administrative (for Special
Access) – System Programming
Mode, Log-On
11-15-06 Service Code Setup,
Administrative (for Special
Access) – Wake on LAN to APSU
Unit
11-15-09 Service Code Setup,
Administrative (for Special
Access) – Transfer to Incoming
Ring Group
11-15-11 Service Code Setup,
Administrative (for Special
Access) – Ethernet Port Reset
11-15-12 Service Code Setup,
Administrative (for Special
Access) – Extension Data Swap
11-15-13 Service Code Setup,
Administrative (for Special
Access) – Remote Access from
DISA
11-15-14 Service Code Setup,
Administrative (for Special
Access) – Modem Access
11-16-01 Single Digit Service Code Setup
– Step Call
2 - 628
Description/Comments
This service code is used to back
up the programmed data on the
SRAM and Call History to the
Flash ROM. While saving the
database, it may cause system
lock up.
Customize the system
programming mode, log-on
Service Codes used by the
administrator in the Hotel/Motel
feature.
Customize the wake on LAN to
APSU unit Service Codes.
When a call is transferred using
this service code, it is transferred
to the ring group destination for
that incoming trunk. For example,
trunk 2 is in Ring Group 4. When
the call is transferred using this
service code, the trunk rings all
extensions programmed for Ring
Group 4 or ring the External
Paging Group for Ring Group 4,
depending on how the system is
programmed.
Customize the ethernet port reset
Service Codes.
Ext. Data Swap = xxx (service
code in accordance with Program
11-01).
Customize the service code for
Remote Access for DISA.
Assign the service code used to
access the internal modem on the
CD-CP00-US.
Assign the Single Digit
(post-dialing) Service Codes.
UNIVERGE SV8100
Assigned Data
1
MLT
# #
(default = 9)

MLT
# #
(default =
 )
MLT
(default not assigned
(default not assigned)
(default not assigned)
MLT
(default not assigned)
(default not assigned)
(default = 740)
(default = 2)
Flexible System Numbering
Level
2 3








