Replacing Take-Up On Sensor And Take-Up Off Sensor - MUTOH ValueJet VJ-1324 Maintenance Manual

3.13 Replacing Take-Up Unit (Option)
3.13.6 Replacing Take-Up ON Sensor and Take-Up OFF
Sensor
(1) Replacing Take-Up ON Sensor Relay Assy and Take-Up OFF Sensor
Relay Assy
This section describes the procedure to replace take-up ON sensor relay Assy (Maintenance number:
DG-40480, Maintenance part name: W_ON sensor Assy ) and take-up OFF sensor relay Assy
(Maintenance number: DG-40481, Maintenance part name: W_OFF sensor Assy ).
1. Remove take-up scroller.
Remove tension arm.
2.
"3.13.1 Removing Tension Arm" p.3-162
Remove take-up unit.
3.
"3.13.2 Removing Take-Up Unit" p.3-164
Remove board chassis.
4.
"(1) Removing Board Chassis" p.3-169
Board Assy" p.3-169
Remove cables for take-up ON sensor relay Assy and take-up OFF sensor relay
5.
Assy from the connector to take-up control board Assy.
2
No.
1 Take-up control board Assy
2 Cable for take-up ON sensor relay Assy and take-up OFF sensor
relay Assy

3.13.6 Replacing Take-Up ON Sensor and Take-Up OFF Sensor

of
"3.13.5 Replacing Take-Up Unit Control
1
Name
6. Remove take-up ON sensor relay Assy and take-up OFF sensor relay Assy from take-up ON and
OFF sensors.
3
4
No.
1 Take-up ON sensor
2 Take-up OFF sensor
3 Take-up ON sensor relay Assy
4 Take-up OFF sensor relay Assy
Replace take-up ON sensor relay Assy and take-up OFF sensor relay Assy
7.
8. To reassemble the unit, reverse the removal procedure.
VJ1324E-M-02
1
2
Name
P.3-176