Replacing The P_Rear_R Sensor Assembly And P_Rear_L Sensor Assembly - MUTOH spitfire 90 Maintenance Manual

4.5.5. Replacing the P_REAR_R sensor assembly and P_REAR_L
sensor assembly
Notes :
Step 1 :
Remove the connectors for the P_REAR_R sensor assembly and P_REAR_L sensor assembly
from the Mainboard assembly.
Step 2 :
Remove the screw fixing the media sensor installation board.
1 = Media sensor installation board
Step 3 :
Remove the media sensor installation board.
Step 4 :
Remove the 2 screws fixing the P_REAR_R sensor assembly.
1 = P_REAR_R sensor assembly
Step 5 :
Replace the P_REAR_R sensor assembly.
Step 6 :
Use the same procedure to replace the P_REAR_L sensor assembly.
Step 7 :
Reinstall all parts in the opposite order of the removal procedure.
Remove following covers before replacing the P_REAR_R sensor assembly and
P_REAR_L sensor assembly.
Side cover R: refer to "Removing side cover R"
Side cover L: refer to "Removing side cover L"
Front cover: refer to "Removing the front cover"
Y rail cover: refer to "Removing the Y rail cover"
Media guide F: refer to "Removing media guide F"
2 = Screw (M3x8) fixing the media sensor installation board
2 = Screws (M2x5) fixing the P_REAR_R sensor assembly
80
Spitfire – Maintenance Manual
AP-74096, Rev. 1.0, 09/06/05