Transfer And Transportation; Transferring The Printer - MUTOH ValueJet VJ-1604 Operation Instructions Manual

2.7 TRANSFER AND TRANSPORTATION

2.7.1 Transferring the printer

Be sure to read and understand the safety warnings before handling the printer.
When using the dedicated stand, transfer the printer according to the procedure below.
(1) Pre-transfer steps
Verify that the printer has been switched OFF.
Step 0 :
Verify that the butterfly bolts attaching the stand with the printer, are well fixed.
Step 0 :
Verify that the printer head is in the rightmost position.
Step 0 :
Attach the protective material (metal plate) for attaching the head unit, and fix it with
Step 0 :
thumbscrews.
Remove the scroller.
Step 0 :
Unplug and remove all cables.
Step 0 :
Release the lock of the caster wheels and transfer the printer.
Step 0 :
Notes
•
The casters supplied with the dedicated stand are manufactured for a small transfer on a plain surface.
When moving the printer outdoors, and in places with big step differences, then move the stand and
printer separately. For further details please refer to the Installation guide.
(2) Steps after transfer
Choose a suitable place to install the printer.
Step 3 :
Refer to "Installation guide"
Verify that the butterfly bolts fixing the stand with the printer are well fixed.
Step 3 :
Connect all cables.
Step 3 :
Perform a nozzle check, and verify that there is no clogging in the printer head.
Step 3 :
Refer to "Nozzle check"
Perform a head alignment.
Step 3 :
Refer to "Adjust print"
No.
1 Head unit
2 Butterfly screw
3 Head unit fastening material (metal plate)
26
Operation Instructions VJ-1604
Name
AP-75769 - Revision 1.0 –2/04/2007
English