Transfer And Transportation - MUTOH ValueJet VJ-1204 User Manual

3.8 TRANSFER AND TRANSPORTATION

This section describes the transfer and transportation of the printer.
3.8.1 Transferring the printer
Caution
•
Transfer the printer maintaining the horizontal position.
•
Do not make the main body of the printer slanting or place it in a vertical position, nor keep the
printer upside down. There is a possibility that the ink inside the printer may leak. Moreover,
normal operation after shifting to these positions cannot be guaranteed.
When using the dedicated stand, transfer the printer following the procedure below.
(1) Pre-transfer steps
Step 1 : Verify that the printer has been switched OFF.
Step 2 : Verify that the butterfly bolts attaching the stand with the printer, are not loosened.
Step 3 : Verify that the printer head is in the rightmost position.
Step 4 : Attach the protective material (metal plate) for attaching the head unit (1), and fix it with
thumbscrews (2).
No.
1
2
Step 5 : Remove the scroller.
Step 6 : Unplug and remove all cables.
Step 7 : Release the lock of the caster wheels and transfer the printer.
Notes
•
The casters supplied with the dedicated stand are manufactured for a small transfer on a plain surface.
When moving the printer outdoors, and in places with big step differences, then move the stand and
printer separately. For further details please refer to the Installation guide.
Name
Protective material (metal plate) for attaching the head unit
Thumbscrew
40 AP-75740 – Rev 1.1 – 23/01/2007
User's Guide ValueJet 1204
Chapter 3: Installing the Unit