Front Wheel - Honda VT750C2 Shadow Spirit Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Install the holder
Install the clutch lever bracket, holder and bolts.
with its 'UP' mark
Align the edge of the bracket with the punch mark
facing up.
on the handlebar and tighten the upper bolt first,
then tighten the lower bolt securely.
Connect the clutch switch connectors.
CLUTCH LEVER
Connect the clutch cable on the clutch lever.
...~
BOLT/NUT
Apply grease to the
Install the clutch lever onto the bracket and tighten
clutch lever pivot
the clutch lever pivot bolt to the specified torque.
bolt sliding surface.
TORQUE: 1 N'm (0.1 kgf·m, 0.7 Ibf.ft)
Tighten the nut to the specified torque while hold­
ing the pivot bolt.
TORQUE: 6 N·m (0.6 kgf·m, 4.4 Ibf.ft)
Install the wire clips onto the tabs on the handlebar.
REARVIEW MIRRORS
Secure the switch wires with the wire clips.
Install the rearview mirrors.
Adjust the clutch lever freeplay (page 4-23).
FRONT WHEEL
REMOVAL
Remove the axle bolt and loosen the right axle ...- - - ­
pinch bolts.
15-13
~-- - - - - -
-
~-----------