Honda VT750C2 Shadow Spirit Service Manual page 224

CLUTCH/GEARSHIFT LINKAGE
Remove the pivot collar and dust seals from the
gearshift pedal.
Check the dust seals for wear or damage.
B . •..•
::~:-;-;c~.
Replace the dust seal if necessary.
..
~"'''"-,.,;.;,..;.:,<i:.:;~,'ill:i~.;:j:;t~,',
"
.
"" ­
'
/
/ '
PIVOT COLLAR
Remove the following:
Bolt
- Washer
- Stopper arm
- Collar
- Return spring
Remove the gearshift spindle from the crankcase
while unhooking the shifter arm from the gearshift
cam plate.
DUST SEALS
INSPECTION
Remove the bolt and stopper plate.
Apply grease to the
Check the gearshift spindle oil seal for deterioration
oil seal lips.
or damage, replace it if necessary.
NOTE:
Install the oil seal with its marked side facing out.
Install the stopper plate and tighten the bolt to the
specified torque.
TORQUE: 13 N·m (1.3 kgf·m, 10 Ibf.ft)
11-15
-
-
- - - - - - - - - - - - - - - ­