IGNITION SYSTEM
ICM
REMOVAL/INSTALLATION
Remove the seat (page 3-3).
Remove the ICM from the battery case cover and
disconnect the ICM 22P connector.
Install the ICM in the reverse order of removal.
IGNITION TIMING
Start the engine, warm it up to normal operating
temperature and then stop it.
Remove the socket bolts and alternator cover.
.
Remove the timing hole cap.
Connect. a tachometer.
Read the
Cormect the timing light to the front or rear spark
manufacturers
pI
lJ$lvvi reo
instructions for
S1:a"rtthe engine, let it idle and check the ignition
timing light
timing.
operation.
IDLE SPEED: 1,200
±
100
rpm
19-9