Cylinder Head Cover Installation - Honda VT750C2 Shadow Spirit Service Manual

Be careful not to let
the cam sprocket
bolts fall into the
crankcase.
Clean and apply a locking agent to the cam sprocket
bolt threads.
Align the cam sprocket bolt holes in the cam
sprocket and camshaft.
Temporarily install the cam sprocket bolt.
Turn the crankshaft counterclockwise 360 0 and
tighten the other sprocket bolt to the specified
torque.
TORQUE: 23 N·m (2.3 kgf·m, 17Ibf·ft)
Turn the crankshaft counterclockwise 360
0
and
tighten the other sprocket bolt to the specified
torque.
Remove an O.D.2mm pin while holding cam chain
tensioner wedge Aand pushing down the wedge B.
NOTE:
• Be careful not to let an 0.0. 2 mm pin fall into the
crankcase.
• Do not forget to remove an 0.0. 2 mm pin before
installing the cylinder head cover.
Fill the oil pockets in the cylinder head with engine
oil.
Adjust the valve clearance (page 4-10).
CYLINDER HEAD/VALVE
CYLINDE'R"cRIiAD,
COVER
I
NSTAtLATI'OIl,
"
\'·§i§la.~,.tb~t:~l,~,~!,~~t~QYe~nC!CYlinder
head mating
SlJ.rf~·~~8f·m~~ll~·~.erl1~ad.Cqver.
Cl1;~~~'th~'~:~sk~tisinJoodcondition,
replace it if
neces~C1,y~
' "
ApplY'P'fg' a. ""Q,ndabond HT or equivalent to
the gasket.g}iOftheCYlinder head cover.
Install the
gi:lli1<.ei·iii·foth~.groove.
Pro Honda Hondabond HT
o
o
CYLINDER HEAD COVER
9-31