FRAME/BODY PANELS/EXHAUST SYSTEM
SEAT
REMOVAL
Remove the 8 mm socket bolts, 6 mm bolt, washer
and seat by moving it rearward.
INSTALLATION
Install the seat by inserting its prong under the
raised lip of the frame.
Install the washer, 6 mm bolt and tighten the 6 mm
bolt securely.
Install and tighten the
8
mm socket bolts to the
specified torque.
TORQUE: 26 N·m
(2.7 kgf·m,
19 Ibf.ft)
SIDE COVER
REMOVALIINSTALLATION
Be careful not to
Remove the side cover by releasing its bosses from
damage the side
the frame grommets.
cover bosses.
Install the side cover by inserting its bosses into the
frame grommets.
SIDE COVER
3-3