Headlight; Bulb Replacement; Headlight Case Removal/Installation - Honda VT750C2 Shadow Spirit Service Manual

2007-2009 motorcycle
Hide thumbs Also See for VT750C2 Shadow Spirit:
Table of Contents

Advertisement

LIGHTS/METERS/SWITCHES
HEADLIGHT
BULB REPLACEMENT
Remove the bolts. collars and headlight unit from
the headlight case.
Disconnect the headlight 3P connector.
HEADLIGHT UNIT
RETAINER
BULB
DUST COVER
Remove the dust cover.
Unhook the retainer and remove the bulb.
I
NOTICE
I
Avoid touching the halogen headlight bulb. Finger
prints can create hot spots that cause a bulb to
break.
Install a new bulb. aligning its tabs with the grooves
in the headlight unit.
Hook the retainer.
Install the dust cover with its "TOP" mark facing up.
Connect the headlight 3P connector.
Install the'headlight unit into the headlight case by
aligning the headlight unit hook with the headlight
case tab.
Install the collars and bolts.
Tighten the bolts to the specified torque.
TORQUE: 4.1 N·m (0.4 kgf·m, 3.0 Ibf·ft)
HEADLIGHT UNIT
HEADLIGHT CASE REMOVAL/
INSTALLATION
Removethe following:
-
Headlight unit (page 21-5)
-
Front turn signal light (page 21-6)
Release the wire harnesses from the clamps.
Remove the wire harnesses from the headlight
case.
CLAMPS
HEADLIGHT CASE
21-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents