Honda VT750C2 Shadow Spirit Service Manual page 266

CRANKSHAFTITRANSMISSION
BEARING THICKNESS:
IDENTIFICATION COLOR
0.5. E (Yellow): Thick
0.5. F (Pink):
0.5. G (Red):
A
(Blue): Middle
B (Black):
!
C (Brown):
o
(Green): Thin
BEARING INSTALLATION
Apply engine oi.1 tqiiel(llbeafing surface.
Set new bearin"g§i
totf1e
metal installer aligning its
side edge with the metal installer grooves.
"
TOOL:
Metal installer set 070MF-MEG0200
Tighten the bolts alternately in several steps to the
specified torque.
TORQUE: 23 N·m (2.3 kgf·m, 17 Ibf·ft)
BOLTS
~AUgn
, BEARING
Set the bearings and special tools assembly on
inside of the crankcase, fitting the bearing edge in
the crankcase main journal.
Align the tTlatingline of the bearings with the index
mark on the crankcase as shown.
Set the hyaraulicpress.
TOOL:
M.eialinstaller set 070MF·MEG0200
METAL
INSTALLER SET
BEARING·
13-19