Brake Pedal - Honda VT750C2 Shadow Spirit Service Manual

REAR WHEEUBRAKE/SUSPENSION
Install the brake arm aligning the punch marks of
the arm and the brake cam.
Install and tighten the brake arm pinch bolt to the
specified torque.
TORQUE: 26 N'm (2.7 kgf·m, 19 Ibf.ft)
Apply 0.5:-.J.{)
of~r.~a~e
to the brake shoe-to­
anchor
pir'l~llgin
.
ace,'
Ins1.an.tK~l:l;rake sa(idSprings.
NOTE: ..... ' .
j . If·.t~l:l'
•• bfake;.• shoesar;reused, the shoes and
sptiflg~'~jjios{be'plaCJ~ir.back
in their original
locations. .
• iristafithe springs with their ends facing up.
cotter pins as
SPRINGS
setting plate and new
kepanelinto the wheel hub
BRAKE PEDAL
REMOVAL
Remove the exhaust system (page 3-8).
Remove the adjusting nut, joint pin and spring.
16-17