Starter Driven Gear/Starter Clutch Installation - Honda VT750C2 Shadow Spirit Service Manual

- - - - - - - - - - - - - - -
ALTERNATORISTARTER CLUTCH
ONE-WAY CLUTCH/STARTER CLUTCH OUTER
Check the one-way clutch sprag for abnormal wear,
damage or irregular movement.
NOTE:
• Do not remove the one-way clutch from the
sr:
clutch outer, unless it is necessary to replace
SPRING
with a new one.
• If the spring is removed from the one-way clutch
groove, replace the one-way clutch assembly
with a new one.
Check the starter clutch outer inner contact surface
for wear or damage.
Measure the starter clutch outer 1.0.
ONE-WAY CLUTCH
SERVICE LIMIT: 74.46 mm (2.931 in)
STARTER DRIVEN GEAR
Check the one-way clutch sprag contact surface for
wear ordamage.
Measu~le
the starter driven gear 0.0.
SERVICE LIMIT: 57.73 mm (2.273 in)
Measure the starter driven gear 1.0.
SERVICE LIMIT: 37.10 mm (1.461 in)
CLUTCH OUTER
STARTER DRIVEN GEARISTAR"rER
CLUTCH INSTALLATION
ew
30 N·m (3.1 kgf·m, 22 Ibf.ft)
- , ONE-WAY CLUTCH
FLYWHEEL
12-8
~ -------~