- - - - - - - - - - - - - - - -
----
- - -
----
-
- - - - - - - - - - - -
CLUTCH/GEARSHIFT LINKAGE
RIGHT CRANKCASE COVER REMOVAL
Drain the engine oil (page 4-13).
Remove the bolts, clutch cover and oil seal rubber.
Remove the polts in a crisscross pattern in several
steps.
;Remove the clutch cable holder and disconnect the
clutch cable.
Remove the right crankcase cover.
Be careful not to
Remove the dowel pins and clean off the sealant
damage the mating
from the mating surface.
surface.
DISASSEMBLY
Remove the clutch lifter piece while turning the
clutch lifter arm clockwise.
11-5