Honda VT750C2 Shadow Spirit Service Manual page 90

LUBRICATION SYSTEM
SERVICE INFORMATION
GENERAL
ACAUTION
Used engine oil may cause skin cancer if repeatedly left in contact with the skin for prolonged periods. Although this is
unlikely unless you handle used oil on a daily basis, it is still advisable to thoroughly wash your hands with soap and
water as soon as possible after handling used oil.
• The crankcase must be separated to service the oil pump.
• When removing and installing the oil pump, use care not to allow dust or dirt to enter the engine.
• If any portion of the oil pump is worn beyond the specified service limits, replace the oil pump as an assembly.
• After the oil pump has been installed, check that oil pressure is correct.
• For engine oil level check (page 4-12).
• For engine oil and filter change (page 4-13).
• For oil pressure indicator inspection (page 21-15).
SPECIFICATIONS
Unit: mm (in)
ITEM STANDARD SERVICE LIMIT
Engine oil capacity
At draining
2.5 liters (2.6 US qt, 2.2 Imp qt)
-
At oil filter change 2.6 liters (2.7 US qt, 2.3 Imp qt) -
At disassembly 3.2 liters (3.4 US qt, 2.8 Imp qt)
-
Recommended engine oil Pro Honda GN4 4-stroke oil (U.S.A. and
Canada) or equivalent motor oil
API service classification: SG or higher
-
JASO T 903 standard: MA
Viscosity: SAE 10W-30
Oil pressure at EOP switch
530 kPa (5.4 kgf/cm
z ,
77 psi)
-
at 5,000 rpm/(80°C/176°F)
Oil pump rotor Tip clearance 0.15 (0.006) 0.20 (0.008)
Body clearance 0.15 - 0.21 (0.006 - 0.008)
0.35 (0.014)
Side clearance 0.02 - 0.08 (0.001 - 0.003)
0.10 (0.004)
TORQUE VALUES
EOP switch
12 N'm (1.2 kgf·m, 9 Ibf·ft) Apply sealant to the threads
EOP switch terminal screw
1.9 N'm (0.2 kgf'm, 1.4 Ibf·ft)
Oil pump assembly bolt 13 N'm (1.3 kgf·m, 10 Ibf·ft)
5-3