Fork Tube/Slider/Piston - Honda VT750C2 Shadow Spirit Service Manual

FRONT WHEEL/SUSPENSION/STEERING
FORK TUBE/SLIDER/PISTON
Check the fork tube and fork slider for score marks,
and excessive or abnormal wear.
Replace any damaged component if necessary.
FORK TUBE
Check the fork piston for score marks, and excessive
FORK PISTON RING
or abnormal wear.
Check the fork piston ring for wear or damage.
Check the rebound spring for fatigue or damage.
Replace any damaged component if necessary.
REBOUND SPRING
Set the fork tube in V-blocks and measure the fork
r - - - - - - - - - - - - - - - - - - - - ,
tube runout with a dial indicator.
Actual runout is 1/2 the total indicator reading.
SERVICE l:IMIT: 0.2
mm (0.01 in)
Visually inspect the slider and guide bushings.
Replace the bushings if there is excessive scoring or
scratching, or if the teflon is worn so the copper sur ­
BUSHING
face appears on more than 3/4 of the entire surface.
Check the back-up ring; replace it if there is any dis­
BACK-UP RING
tortion at the points shown.
Check points
COPPER SURFACES
15-23