with
CYLINDER HEAD/VALVE
Lubricate each rocker arm slipper surface
molybdenum disulfide oil.
NOTE:
Before camshaft holder installation, loosen
valve adjusting screw and lock nut fully.
Install the camshaft holder assembly.
Install the camshaft holder bolts and nuts.
Tighten the bolts and nuts to the specified torque in
a crisscross pattern in several steps.
TORQUE:
Camsllaft holder bolt: 23 N'm (2.3 kgf·m, 17 Ibf·ftl
Camshaft holder nut: 23 N·m (2.3 kgf·m, 17 Ibf·ftl
Install the cam sprocket to the cam chain with the
"IN" mark facing inside.
Installthe carn sprocket on. the camshaft flange and
check that thetirning-marks align with the upper
surface of the cylibder head.
9..30