Honda VT750C2 Shadow Spirit Service Manual page 272

CAM PLATE
" ,
...
; /
BOLT
ew
CRANKSHAFT/TRANSMISSION
Install the bearing on the shift drum.
BEARING
Install the dowel pin into the shift drum hole.
/
Install the gearshift cam plate by aligning its hole
with the dowel pin.
Clean and apply a locking agent to the gearshift cam
plate bolt (page 1-19).
Install and tighten the bolt to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 Ibf·ft)
13-25