Camshaft Holder Disassembly - Honda VT750C2 Shadow Spirit Service Manual

CYLINDER HEAD/VALVE
CAMSHAFT HOLDER DISASSEMBLY
NOTE:
The front and rear cylinder camshaft holder service
procedures are the same.
Remove
the rocker arm shafts, intake and exhaust
rocker arms.
ROCKER ARM INSPECTION
Check the sliding surface of the rocker arms for
wear or damage where they contact the camshaft,
or for clogged oil holes.
Check the contact surface of the valve adjusting
screw for wear or damage.
Measure the 1.0. of each rocker arm.
SERVICE LIMIT: 12.05 mm (0.474 in)
ROCKER ARM SHAFT INSPECTION
Check the 'rocker arm shafts for wear or damage.
Measure each rocker arm shaft 0.0.
SERVICE LIMIT: 11.83 mm (0.466 in)
Calculate the rocker arm-to-shaft clearance.
SERVICE LIMIT: 0.07 mm (0.003 in)
Replace the rocker arm and/or shaft if necessary.
CAMSHAFT HOLDER INSPECTION
Check the camshaft journal surfaces of each cam­
shaft holder for scoring, scratches or evidence of
insufficient lubrication.
EXHAUST ROCKER ARM
INTAKE ROCKER ARMS SHAFTS
JOURNALS
9-13