ALTERNATORISTARTER CLUTCH
Clean the one-way clutch and apply engine oil to the
sprag.
Install the one-way clutch into the starter clutch
outer with its flange side facing the flywheel.
NOTE:
If the spring is removed from the one-way clutch
groove, replace the one-way clutch assembly with a
new one.
Install the starter clutch outer/one-way clutch to the
flywheel.
Hold the flywheel using a special tool.
TOOL:
Flywheel ho.lder
07725-0040001 or
equivalent com·
mercially avail
able in U.S.A.
Clean and apply a locking agent to the socket bolt
threads;
.
Install and tighten the socket bolts to the specified
torque.,
TORQUE: 30 N·m (3.1 kgf·m,22lbf·ft)
Install the starter driven gear to the flywheel while
turning the driven gear counterclockwise.
Recheck the one-way clutch operation (page 12-7).
\
CLUTCH OUTER
ONE-WAY CLUTCH
DRIVEN GEAR
12-9