Honda VT750C2 Shadow Spirit Service Manual page 345

FRONT WHEEL/SUSPENSION/STEERING
ASSEMBLY
Before assembly, wash all parts with a high flash
point or non-flammable solvent and wipe them off
completely.
..
22.1
N7kgt.m.
161bf.ftl
. .
~
DUST SEAL
lIIiil'
PISTON RING
n--o.RING-:
STOPPER RING
! j S P A C E R
. . " OIL SEAL
~
SPRING SEAT
FORK SPRING
REBOUND SPRING
FORK TUBE
Do not open the
Install the slider bushing being careful not to dam­
bushing slit more
age the coating of the bushing, if it has been
than necessary.
removed.
Remove the burrs from the bushing mating surface,
being careful not to peel off the coating.
Install the oil seal
Apply fork fluid to the new oil seal lips.
with its marked
Install the guide bushing, back-up ring and new oil
side facing up.
seal onto the fork tube.
SLIDER BUSHING
Install the rebound spring to the fork piston, then
install theminto the fork tube.
If the piston ring is removed, install a new piston
ring into the fork piston groove.
REBOUND SPRING
FORK PISTON PISTON RING
15-24