FRONT WHEEL/SUSPENSION/STEERING
Tighten the handlebar lower holder nuts to the
specified torque.
TORQUE: 23 N·m (2.3 kgf·m, 17 Ibf.ft)
INNER WEIGHT REMOVAUINSTALLATION
Remove the grip or throttle pipe from the handle
RETAINER RING
bar.
Straighten the weight retainer tabs by the screw
driver or punch.
Remove the inner weight assembly from the han
RUBBER CUSHIONS
dlebar.
Discard the retainer ring.
Check the rubber cushions for wear or damage.
Install a new retainer ring onto the inner weight.
Insert the inner weight assembly into the handlebar
by hooking the retainer ring tabs with the holes in
the handlebar.
INNER WEIGHT
15-1.0