-
- -
- - - - - - - - -
CLUTCH/GEARSHIFT LINKAGE
CLUTCH INSTALLATION
Apply molybdenum disulfide oil to the clutch outer
guide outer surface.
Install the clutch outer guide to the mainshaft.
Install the oil pump drive chain, drive sprocket and
driven sprocket as a set.
NOTE:
• Install the oil pump driven sprocket with the
"0"
marks side facing inside.
• Align the flat surfaces of the driven sprocket hole
and oil pump shaft end.
AppIYl()(::king ageIltto
the
oil pump driven sprocket
bolt threads' and Install the washer and bolt.
NOTE:
.,-;
-
Tighten the dtj\/en sprocket bolt to the specified
torque afterinstilJling the clutch.
.................-.......
11-18