Honda VT750C2 Shadow Spirit Service Manual page 226

CLUTCH/GEARSHIFT LINKAGE
Hold the stopper arm with the screwdriver, and
tighten the bolt securely as shown.
Apply grease tq the dust Seal lips.
Install the dustsealsandpivot collar to the gearshift
pedal.
4~
/'''r
PIVOT COLLAR
~
DUST SEALS
Install the gearshift pedal, washer and pivot bolt.
Tighten the pivot bolt to the specified torque.
TORQUE: 39 N'm (4.0 kgf·m, 29 Ibf.ft)
Install the gearshift arm to the spindle, aligning with
the punch marks.
Ii'lb~e~ the~inc~
bolt to the specified torque.
TQttq~§~~12"':~'("!~J(9f.m, 9 Ibf·ft)
11-17