Honda VT750C2 Shadow Spirit Service Manual page 132

FUELSVSTEM
FUEL CUT-OFF SOLENOID VALVE
REMOVAL/INSTALLATION
Remove the following:
- Steering side covers (page 3-5)
- Fuel tank (page 3-4)
Release the wire band and disconnect the fuel cut ­
off solenoid valve 2P connector.
Disconnect the fuel cut-off solenoid valve hose,
EVAP CAV control valve hose and vacuum hose
(page 1-35).
Remove the fuel cut-off solenoid valve from the
stay.
Route the solenoid
Installation is in the reverse order of removal.
valve hoses and
wire properly
(page 1-35).
INSPECTION
Remove the fuel cut-off solenoid valve (page 6-33).
Damage to the fuel
Connect a vacuum pump to the vacuum port. Apply
cut-off solenoid
the specified vacuum to the fuel cut-off solenoid
valve may result
valve.
from use of
a
high
TOOL:
pressure air source.
Vacuum pump Commercially available
Use
a
hand­
operated air pump
SPECIFIED VACUUM: 250 mm Hg
only.
The specified vacuum should be maintained.
Replace the fuel cut-off solenoid valve if vacuum is
not maintained.
Remove the vacuum pump.
Connect the pressure pump to the float chamber
port.
Pump air through the EVAP CAV control valve port.
VACUUM PORT
VACUUM PUMP
FUEL CUT-OFF SOLENOID VALVE
FLOAT CHAMBER PORT
PRESSURE PUMP
6-33