FRAME/BODY PANELS/EXHAUST SYSTEM
Install new gaskets.
Install the muffler assembly.
NOTE:
Inserting the rear exhaust pipe to the rear exhaust
port first, then insert the front exhaust pipe to the
front exhaust port.
Temporarily install the all fasteners.
Tighten the exhaust pipe joint nuts to the specified
torque.
TORQUE: 25 N·m (2.5 kgf·m, 18 Ibf·ft)
Tighten the muffler mounting nuts to the specified
torque.
TORQUE: 44 N·m (4.5 kgf·m, 32 Ibf·ft)
NOTE:
Always inspect the exhaust system for leaks after
installation.
3-12