CLUTCH/GEARSHIFT LINKAGE
Install the clutch assembly into the clutch outer.
Install the end clutch disc into the shallow slots of
the clutch outer.
Install the thrust washer.
Install the spring washer with its "OUT SIDE" mark
facing out.
Apply engine oil to the threads and seating surface
of a new clutch center lock nut and install it onto the
mainshaft.
Hold the clutch center using a special tool
tighten the lock nut to the specified torque.
TOOL:
Clutch center holder
07JMB-MN50301 or
07HGB·001010B (plate)
and
07HGB-001020B (collar)
(U.S.A. only)
TORQUE: 128 N'm (13.1 kgf·m, 94 Ibf·ft)
11·20