Honda VT750C2 Shadow Spirit Service Manual page 116

FUEL SYSTEM
Install a new a-ring into the float chamber groove
properly.
Install the float chamber and tighten the float cham­
ber screws to the specified torque.
TORQUE: 2.1 N'm (0.2 kgf·m, 1.5 Ibf·ft)
Install the following:
- Spring washer
-
Pl~il'lyvasbers
- CoJlat"'­
-Act:~!etaj:or
pump link
- Plastic washer
- New cotter pin
Tighten the accelerator pump link mounting bolt to
the specified torque.
TOR9UE:3.4
N~rri
(0.3 kgf·m, 2.5 Ibf·ft)
.VACUUM CHAMBER
Insenthe jetneedle into tl)e vacuum piston.
Install
tl'l~~"~Brln!:l
int<:Uhe
jet~eedle
holder and set
the jet
de~CileI;l9j<lerJritcjthevacuum
piston.
Turn
the-f~t ri~edleholderclockwise
while pressing
it until it locks.
JETNEEDlE~/
. SPRING .
JET NEEDLE HOLDER
6-17