Honda VT750C2 Shadow Spirit Service Manual page 297

CRANKSHAFTITRANSMISSION
Install the left crankcase bolts and tighten the 8 mm
bolts in a crisscross pattern in several steps.
TORQUE:
8 mm bolt: 23 N·m (2.3 kgf·m, 17Ibf·ft)
Tighten the 6 mm bolts securely.
Clean and apply locking agent to the bolt threads
(page 1-19).
Install the bearing setting plate and tighten the
bolts.
r-~----"""""
Install and tighten the bolt with the washer by hold­
SHAFT HOLDER A BOLTIWASHER
ing the output driven gear shaft using the special
tools.
TOOLS:
Shaft holder A 07PAB-0010100 or
07923-6890101
(U.S.A. only)
Holder handle 07PAB-0010400
TORQUE: 49N·m (5.0 kgf·m, 36 Ibf·ft)
Rechecl('the all crankcase bolt torque values.
Install the cam chains.
Apply locking agent to the cam chain tensioner set ­
ting plate bolt threads (page 1-19).
Install the cam chain tensioner setting plates and
tighten the bolts.
Install the remaining parts (page 13-3).
Installthe engine into the frame (page 8-7).
j.
13-50