CYLINDER HEAD/VALVE
CYLINDER HEAD REMOVAL
NOTE:
• The engine must be removed from the frame
before servicing the cylinder head.
• The front and rear cylinder head service proce
dures are the same.
Remove the following:
-
Engine (page 8-4)
Cylinder head cover (page 9-6)
-
Camshaft (page 9-8)
-
Intake manifold (page 6-23)
Remove the bolt and water hose joint from the cyl
inder.
Rear cylinder head
Disconnect the vacuum hose.
only:
Remove the cam chain tensioner bolts and sealing
washers.
~
Remove the cam chain tensioner.
CAM CHAIN TENSIONER
Loosen the bolts
and nuts in
a
crisscross pattern
in several steps.
Remove the following cylinder head bolts and nuts:
-
6 mm bolt
-
8 mm bolts
-
10 mm nuts/washers
Be careful not
to
damage the mating
surface when
Remove the cylinder head.
removing the
cylinder head.
9-14