Honda VT750C2 Shadow Spirit Service Manual page 399

HYDRAULIC BRAKE
Check the caliper pin boot and replace it if it is hard,
PAD RETAINER
deteriorated or damaged.
Apply 0.4 g of silicone grease to the inside of the
' . 800\...-' i iSiIi
caliper pin boot.
Install the caliper pin boot in the bracket.
Apply Honda Bond A or equivalent to the pad
retainer mating surface.
Install the retainer onto the bracket.
Ifthe bracket pin is removed, apply locking agent to
the threads and tighten it.
TORQUE: 12 N·m (1.2 kgf·m, 9 Ibf.ft)
PIN
BRACKET
Check the bracket pin boot and replace it if it is hard,
deteriorated or damaged.
Apply 0.4 g of silicone grease to the inside of the
bracket pin boot.
Install the bracket pin boot and pad spring in the cal ­
iper.
If the caliper pin is removed, apply locking agent to
the threads and tighten it.
TORQUE: 27 N'm (2.8 kgf'm, 20 Ibf.ft)
Install the caliper bracket to the caliper body.
Install the brake caliper assembly so the disc is posi ­
tioned betwe@fl the pads, being careful not to dam ­
age the pads.
Install new caliper mounting bolts and tighten them
to the specified torque.
TORQUE: 30 N·Iri(3.1 kgf·l1'!, 22 Ibf·ft)
~
t
~
ew
PAD SPRING
~>4<
PIN
.ew
~RAKE ~ALlPER ASSE~B~j·
17-.16