Service Information - Honda VT750C2 Shadow Spirit Service Manual

CLUTCH/GEARSHIFT LINKAGE
SERVICE INFORMATION
GENERAL
• The clutch and gearshift linkage can be serviced with the engine in the frame.
• Engine oil viscosity, oil level and the use of oil additives have an effect on clutch disengagement. Oil additives of any
kind are specifically not recommended. When the clutch does not disengage or the motorcycle creeps with the clutch
disengaged, inspect the engine oil and oil level before servicing the clutch system.
SPECIFICATIONS
Unit: mm (in)
ITEM STANDARD SERVICE LIMIT
Clutch lever freeplay 10 - 20 (3/8 - 13/16) -
Spring free length 45.3 (1.78) Clutch 43.9 (1.73)
Disc thickness
I
Disc A 2.62 - 2.78 (0.103 - 0.109) 2.3 (0.09)
End disc 2.92-3.08 (0.115-0.121) 2.6(0.10)
I
Plate warpage 0.30 (0.012)
-
Clutch outer guide
I
1.0. 21.991 - 22.016 (0.8658 - 0.8668) 22.03 (0.867)
31.959 - 31.975 (1.2582 -1.2589) 31.92 (1.257)
I
0.0.
21.95 (0.864) 21.967 - 21.980 (0.8648 - 0.8654)
Mainshaft
0.0.
at clutch outer guide
0.08 (0.003)
0.011 - 0.049 (0.0004 - 0.0019) Clutch outer guide-to-mainshaft clearance
32.000 - 32.025 (1.2598 - 1.2608) 32.09 (1.263)
Clutch outer 1.0.
Clutch outer-to-outer guide clearance 0.025 - 0.066 (0.0010 - 0.0026) 0.18 (0.007)
32.025 - 32.145 (1.2608 - 1.2655) 32.16 (1.266)
Oil pump drive sprocket
1.0.
Oil pump drive sprocket-to-c1utch outer guide c1ear­
0.050 - 0.186 (0.0020 - 0.0073) 0.23 (0.009)
ance
TORQUE VALUES
Clutch lifter plate bolt
Clutch center lock nut
Clutch cover socket bolt
Primary drive gear bolt
Gearshift arm pinch bolt
Oil pump driven sprocket bolt
Gearshift pedal pivot bolt
Gearshift spindle return spring pin
Gearshift spindle oil seal stopper
plate bolt
TOOLS
12 N'm (1.2 kgf·m, 9 Ibf·ft)
128 N'm (13.1 kgf'm, 94Ibf·ft)
10 N'm (1.0 kgf·m, 7 Ibf·ft)
88 N·m (9.0 kgf'm, 65 Ibf·ft)
12 N'm (1.2 kgf·m, 9 Ibf·ft)
15 N·m (1.5 kgf'm, 11 Ibf·ft)
39 N'm (4.0 kgf'm, 29 Ibf·ft)
23 N'm (2.3 kgf·m, 17 Ibf·ft)
13 N'm (1.3 kgf·m, 10 Ibf·ft)
Lock nut; replace with a new one and stake
Apply engine oil to the threads and seating
surface
Apply engine oil to the threads and seating
surface
Apply locking agent to the threads
Clutch center holder
Gear holder, 2.5
07JMB-MN50301 07724-0010100
or 07HGB-001010B (plate) and or 07724-001A100 (U.S.A. only)
07HGB-001020B (collar) (U.S.A.
only)
11-3