Honda VT750C2 Shadow Spirit Service Manual page 161

ENGINE REMOVAL/INSTALLATION
Connect the starter motor cable and tighten the ter ­
minal nut to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 Ibf.ft)
Connect the ground cable and tighten the bolt
securely.
Close the terminal cover securely.
Connect the clutch cable end to the clutch lifter arm.
Install the clutch cable holder and bolt.
Tighten the bolt,securely.
Connect the secondary air supply hoses to the PAIR
check valve covers.
Install the gearshift arm to the gearshift spindle,
aligning with the punch marks.
Tighten the gearshift arm pinch bolt to the specified
torque. .
TORQUE: 12 N·m(1.2 kgf·m, 9 Ibf·ft)
...- - _.....
...- ­
8-10