Honda VT750C2 Shadow Spirit Service Manual page 336

FRONT WHEEL/SUSPENSION/S"rEERING
WHEEL BEARING
Turn the inner race of each bearing with your finger.
The bearings should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in
the hub.
Replace the wheel
Remove and discard the bearings if the races do not
bearings in pairs.
turn smoothly and quietly, or if they fit loosely in the
hub (page 15-15).
DISASSEMBLY
Remove the dust seals from both sides of the hub.
Do not reuse the
Remove the bolts in a crisscross pattern in several
bolts.
steps and remove the brake disc.
Replace the wheel
Install the remover head into the bearing.
bearings in pairs.
From the opposite side of the wheel, install the
Do not reuse old
remover sbaft and drive the bearing out of the
bearing.
wheel hub.
Remove the distance collar and drive out the other
bearing.
TOOLS:
Bearing remover shaft 07GGD-0010100
Bearing retnover head, 20 mm 07746·0050600
15-15