Honda VT750C2 Shadow Spirit Service Manual page 312

FINAL DRIVE
Remove the breather cap and blow compressed air
through the hole.
Install the breather cap.
Apply grease to a new oil seal lips.
Drive the oil seal into the gear case with the marked
side facing down until it is fully seated.
TOOLS:
Driver
07749-0010000
Attachment, 44 x 49.5 mm 07945·3330300
Drive a new ring gear case bearing into the gear
case with the marked side facing inside until it is
fully seated using the special tools.
TOOLS:
Driver 07749-0010000
Attachment, 52 x 55 mm 07746·0010400
PINION
NEEDLEJ~EAJlING
r ~lon,
. . . •
· .tg).·.t.a:.e.·~t~t;:~r
.
.r
ringuntilthe end of the stopper . . . '
.
.~J
-
c~ss
hoJe.
$tri!Cec
. c , / c .
;;.~ri(tor·the ring with a punch
tqip~.Q£!'1b~~rj(jli.:>~ard.
Gi"aspthe
en~ottheJing
with needle-nose pliers
and pUll the stopper ring out through the access
hohi .
14-15