Honda VT750C2 Shadow Spirit Service Manual page 348

FRONT WHEEL/SUSPENSION/STEERING
~'~
Install the stopper ring into the groove into the fork
DUST SEAL'"
slider, being careful not to scratch the fork tube slid­
ing surface.
Coat a new dust seal lips with fork fluid and install
it.
..-'
.......
INSTALLATION
Install the fork leg into the steering stem and top
bridge.
Align the fork tube top end surface with the top
bridge as shown.
Tighten the bottom bridge pinch bolts to the speci­
fied torque.
TORQUE:
~9
N·m (5.0 kgf·m,
36
Ibf·ft)
Install the turn signal light, collar and bolt.
Tighten the bolt securely.
15-27