Front Wheel - Honda ST50 Shop Manual

b. Dlsasserubl y
(I) Remove the rear cushion assembly by loose•
ning the upper and lower cap nuts.
(2) Disassemble the rear cushion component
pam with the special tool as shown in Fig.
72. (Tool No. 07959-3290000)
c. Inspection
{I) Damping capacity of rear cushion damper
25kg/0.5m/sec(2.79 lb/i n/scc.)
(2) Rear cushion spri ng
Standard Value
Free Len11h 20S.9mm(l.llin.)
Lo,d
14 kg/ 11. 1 mm (30.91b/0.Oin.)
Lo,d
63kg/50mm (ll8.9 lb/ i .97in.)
Lo,d
!00k&/68.lmm(220.Slb/2.1lin.)
d. R~ mbly
After reassembly, opera1c the rear cushion by
hand to assure that there is no binding between
the spring and the case and no noise comes from
the cushion.
4.5 F ront Wheel
Brake shoe
39
Flg.73