Honda VT750C2 Shadow Spirit Service Manual page 346

FRONT WHEEL/SUSPENSION/STEERING
Do not over-tighten
the vise on the fork
slider.
If the fork piston
turns with the fork
center socket bolt,
temporarily install
the fork spring,
spring seat, spacer
and fork cap.
Install the oil lock piece and spring to the fork piston
FORK SLIDER
end.
Install the fork tube assembly into the fork slider.
/ " SPRING
, / FORK PISTON
/ @
I
OIL LOCK PIECE
Hold the fork slider in a vise with soft jaws.
C)y
SOCKET BOLT
Apply locking agent to the fork center socket bolt
threads.
Install the socket bolt with a new sealing washer.
Tighten the fork center socket bolt to the specified
SOCKET BOLT
torque.
TORQUE: 29.5 N·m (3.0 kgf'm, 22 Ibf·ft)
Drive the oil seal until the stopper ring groove is vis ­
ible using the special tools.
TOOLS:
Slider weight
07947-KA50100
Driver attachment
07947-KF00100
Oil SEAL
BACK-UP
RING
DUST SEAL
STOPPER
~.....,II::o":¥" RING
DRIVER
ATTACHMENT SET
15-25